67 PC Carpet

I think it was discussed in Charely Maule's resto thread I can't seem to find, but KevinK started the one below that should help!

https://camaropacecars.com/eve/...0019733/m/9101051836

Mike L.

Posts: 2529 | Location: Indy | Registered: 20 September 2005

Ignored post by MLakin posted

Supporter
Victory Lane

posted

Charleys thread also speaks tons

tom @ camaropacecars.com ( remove the space between m,@,c)

Posts: 13412 | Location: Arlington Mass | Registered: 01 May 2005

Ignored post by Tom McGinnity posted

Z11Weaver

Victory Lane

posted

Thank you for bringing back up to speed on the carpet issues. I do remember reading the post. I’m guessing to date the general consensus is to purchase Trim Parts Sky Blue 512 carpet and matching door panel carpet. Has any advancements been made with Al Knoch on finally getting it right? What color of blue die and brand are you guys using on the kick panels?

Posts: 1416 | Location: Kansas | Registered: 02 June 2007

Ignored post by Z11Weaver posted

Supporter
Victory Lane

posted

No. The knock thing has fallen face first again. And let me tell you its not from a lack of trying. Mike Rossi has gotta have 50 hours into this the last ten years. My guess is that they are ambivalent about doing such anal work because lets face it.. Theres no market for it

My friend Chris did in fact send his blue dash board to them and it came out super amazing. I had one done as well.. As far as I'm concerned dash board wise that's the only way to go using them and your original substrate.

tom @ camaropacecars.com ( remove the space between m,@,c)

Posts: 13412 | Location: Arlington Mass | Registered: 01 May 2005

Ignored post by Tom McGinnity posted

Supporter
Victory Lane

posted

Kick Panel wise I used bark blue interior dye for a 69 Camaro.. Its NOT right but its way closer than anything else.. For my O-1 car I will endeavor to do even better but have not tackled that as of yet

tom @ camaropacecars.com ( remove the space between m,@,c)

Posts: 13412 | Location: Arlington Mass | Registered: 01 May 2005

Ignored post by Tom McGinnity posted

Victory Lane

posted

quote:
Originally posted by Z11Weaver (4/30/15):
Has any advancements been made on finally getting it right?

Hello. I have had some recent conversations and new info. about interior soft parts which at this point leave me cautiously optimistic. If details come together as I am hoping for, I am anxious to move forward quickly for my own reasons.

At one point some folks had expressed interest in a group order. Not sure if there was ever a headcount established? If anyone interested in more details please PM me with contact info. Please be patient for reply as I have not been keeping current on Email lately.

(Disclaimer: This is not a commitment of action or a promise of specific outcomes-- simply an attempt to gauge the level of interest.)

Posts: 682 | Location: Phoenix AZ | Registered: 14 January 2012

Ignored post by Charley Maule posted

Victory Lane

posted

Here is an example of stuff I'm looking at... More pix, etc. on my thread at Charley Maule...Newest member

P.S. I'm liking the one in the middle...

Posts: 682 | Location: Phoenix AZ | Registered: 14 January 2012

Ignored post by Charley Maule posted

Supporter
Victory Lane

posted

Middles nice

tom @ camaropacecars.com ( remove the space between m,@,c)

Posts: 13412 | Location: Arlington Mass | Registered: 01 May 2005

Ignored post by Tom McGinnity posted

Z11Weaver

Victory Lane

posted

But not dead on.

Posts: 1416 | Location: Kansas | Registered: 02 June 2007

Ignored post by Z11Weaver posted

Tom D

Supporter 2009
Victory Lane

posted

Man, that carpet really changes color over the years. I think that the middle sample will look good with new carpet. You won't be able to tell the difference.

Posts: 2083 | Location: Sacramento/Auburn area, CA | Registered: 12 December 2005

Ignored post by Tom D posted

Victory Lane

posted

quote:
Originally posted by Charley Maule:
quote:
Originally posted by Z11Weaver (4/30/15):
Has any advancements been made on finally getting it right?

Hello. I have had some recent conversations and new info. about interior soft parts which at this point leave me cautiously optimistic. If details come together as I am hoping for, I am anxious to move forward quickly for my own reasons.

At one point some folks had expressed interest in a group order. Not sure if there was ever a headcount established? If anyone interested in more details please PM me with contact info. Please be patient for reply as I have not been keeping current on Email lately.

========================================

Hello again from 'whatever happened to...?' land.

Never received any replies-- not one -- to my note above. I am working on a custom door panel order I am hoping to see happen in the VERY near future. Making one last call to see if any interest-- Right now it's just me and my restoration guy.

Regards all...

Posts: 682 | Location: Phoenix AZ | Registered: 14 January 2012

Ignored post by Charley Maule posted

Victory Lane

posted

Adding carbon copy of exchange from another page:
===========================================

quote:
Originally posted by Geoff Smith:
Charlie,
Unfortunately the site is much slower nowadays... Maybe cause there are not that many cars being restored or who knows? I would be interested to know more about what you are lining up etc.

quote:
Originally posted by Charley Maule:
Geoff; a fair enough question... i have had several conversations with a highly-regarded supplier, who seems willing to entertain the notion of a custom door panel order (using my carpet). But I don't want to screw this up by blathering TMI on the Internet before it's appropriate.

A suggestion I had read on this site somewhere/sometime; was to find out how many people might be interested in a special order (Which a manufacturer's enquiring mind might want to know). I recall somebody started on this once, but I didn't recall ever seeing any conclusions. So I put out my own feeler (now almost a year ago). At this point I can't wait any longer. So due to the underwhelming response I am moving forward ASAP on my own.

The intent was to give back to the hobby in this small way-- not personal gain. I hope this answers any questions in the meantime until I can get a comfort level posting more details. Thanks-Charley

Posts: 682 | Location: Phoenix AZ | Registered: 14 January 2012

Ignored post by Charley Maule posted

Victory Lane

posted

Juuust returned home from little road trip... Some exciting new developments to share when I wake up. Stay tuned...

Posts: 682 | Location: Phoenix AZ | Registered: 14 January 2012

Ignored post by Charley Maule posted

Supporter
Victory Lane

posted

tom @ camaropacecars.com ( remove the space between m,@,c)

Posts: 13412 | Location: Arlington Mass | Registered: 01 May 2005

Ignored post by Tom McGinnity posted